Operation; Control Panel - AEG SCB61921FS Notice D'utilisation

5 cm

4. OPERATION

4.1 Control panel

4.2 Switching on
1. Insert the plug into the wall socket.
2. Touch the temperature regulator
button if all LED indicators are off.
4.3 Switching off
Keep touching the temperature
regulator button for 3 seconds.
All indicators light off.
4.4 Temperature regulation
To operate the appliance, touch the
temperature regulator until the LED
corresponding to the required
temperature lights up. Selection is
progressive, varying from 2°C to 8°C.
min.
200 cm 2
min.
200 cm
1
2 3
5 4
CAUTION!
Refer to the assembly
instructions for the
installation.
2
Temperature indicator LED
1
Freezer alarm indicator LED
2
Frostmatic indicator LED
3
Frostmatic button
4
Reset alarm button
Temperature regulator
5
ON/OFF button
Coldest setting: +2°C.
Warmest setting: +8°C.
A medium setting is
generally the most suitable.
Choose the setting keeping in mind that
the temperature inside the appliance
depends on:
• room temperature
• frequency of opening the door
• quantity of food stored
• appliance location.
1. Touch temperature regulator.
Current temperature indicator blinks.
Any time you touch the temperature
regulator, the setting moves by one
position. The corresponding LED blinks
for a while.
ENGLISH 7