OPERATING INSTRUCTIONS
BEFORE USING MIXER
Remove any packages, disassemble any detachable
parts. Clean the dough hooks and beaters. Before
assembling the mixer, make sure the power cord
is unplugged from the power outlet and the speed
selector is on "Off" position.
USING YOUR MIXER
Note: one of two beaters/dough hooks has a
small, metal washer-ring (collar) around the top
of the stem. Beaters/dough hooks with the washer-
ring are the ones which must be inserted into the
bigger of the two holes in the mixer's body
1.
push the beaters/dough hooks with the washer-
ring into the bigger hole. Rotate the beater until it
locks into position. (see figure 1.)
2.
push
other
beaters/dough
washer-ring) into the other hole. Rotate the
beater until it locks into position. (See Figure 2.)
Note:After installing Beaters/Dough Hooks/
Egg Whisk, gently pull each Stem to be sure
they are secured properly.
3.
Ensure that the unit is on "Off" position, then plug
in the power source.
4.
Set the speed selector to your desired speed.
There are 6 speed settings to be selected.
Note: When kneading yeast dough, we suggest
to set the speed selector on the lower speed
and then on the higher speed to achieve the best
results.
Note: The mixer will run at the highest speed
when pressing turbo button.
speed
task
description
1
fold
To start mixing
2
stir
To combine liquids with dry
ingredients
3
mix
To mix batters and dough
recipes
4
blend To combine light mixtures;
for fillings/puddings
5
beat
To combine cake mixes and
other light mixtures
6
whip
To whip cream and aerating
eggs
5.
6.
rubber or wooden spatula.
7.
hooks
(without
sure the speed selector is on Off position.
CLEANING AND MAINTENANCE
1.
2.
3.
4.
Warning: Any other maintenance operation shall be
performed by an authorized service personnel.
COOKERY TIPS
Warning: Do not put knife, metal spoons, fork
and so on into bowl while operating.
The max operation time shall not exceed 10
minutes, then have a rest for a proper time until
your hand mixer has cooled down between two
consecutive cycles.
Note: During operation you may rotate the
bowl by hand to achieve the best results.
When mixing is complete, turn the speed
selector to "Off" setting, and unplug the cord
from the power outlet.
Note: If necessary, scrape the food particles in
excess from the beaters or dough hooks a
Hold the beaters or dough hooks with one hand
and press the Ejector button down firmly with the
other hand to remove beaters, dough hooks or
whisk.
Note: Remove the beaters or dough hooks
only with the speed selector on Off position.
Note: During operation, you can move the
mixer to upright position occasionally, but make
Unplug the appliance and wait for it to be
completely cooled down before cleaning
Wipe over the outside surface of the head with a
damp cloth and mop with a soft dry cloth.
Wipe any food particles in excess out of the
power cord.
Wash beaters, dough hooks and whisk in warm
soapy water and dry them with a soft cloth.
Note: Beaters, dough hooks and whisk may be
washed in the dishwasher.
Caution: The mixer can not be immersed into
water or other liquid.
Note: Refrigerated ingredients, i.e., butter and
eggs should be at room temperature before
it en
11