SPL-Technik 310 Manuel D'utilisation page 5

Preparation for flight
1. Charge the model and insert fresh
batteries in the transmitter.
2. Turn on the power of the transmitter.
3. Move the helicopter's power switch to
the ON position. The indicator on board
the helicopter should flicker brightly.
4. Place the helicopter on an even
surface in front of you.
5. Be sure that the distance between
you and the helicopter is around 2 metres.
6. Wait until the indicator on the model
stops flickering. Now you can take off smoothly by moving the gas stick upwards.
Flight and manoeuvres
Important: only small and smooth changes in the position of
the sticks ensure stable flight of the helicopter.
Smoothly move the left stick upwards (away
Up
from yourself)
Smoothly move the left stick back (towards
Down
yourself)
Smoothly move the right stick to the right.
Turn to the
right
Smoothly move the right stick to the left.
Turn to the
left
Please note: when the helicopter takes off, movement forwards occurs automatically.
5