Setting Up The Bluetooth Function; Before Use; Registering Your Cell-Phone; Downloading The Phone Book - Kenwood KCA-BT100 Mode D'emploi

Setting up the Bluetooth Function

Before Use

• You need to register your cell-phone before using
it with this unit. For more details, see <Registering
Your Cell-Phone> (page 5).
• If you have registered two or more cell-phones, you
need to select one of them. For more details, see
<Selecting the Cell-Phone You Wish to Connect>
(page 10) or <Selecting a Hands-Free Phone> (page
17).
• To use the Phone Book, it must be downloaded to
this unit in advance. For details, see <Downloading
the Phone Book> (page 5).
• You can set up the voice output speaker. For more
details, see <Setting up the Voice Output Speakers>
(page 11) or <Setting up the Hands-Free Phone>
(page 16).

Registering Your Cell-Phone

To make your cell-phone usable with this unit, you
need to register it (pairing). You can register up to
five cell-phones to this unit.
1
Turn on the control unit.
2
Start cell-phone registration on the cell-phone
By operating the cell-phone, carry out hands-free
phone registration (pairing). Select "KCA-BT100"
from the list of connected units.
3
Enter a path key
Enter "1234" as a path key.
Check that registration is complete on the cell-
phone.
4
By operating the cell-phone, start hands-free
connection.
• For how to operate the cell-phone, refer to the
Instruction Manual that comes with your cell-phone.
• You can register up to five cell-phones. Registering the
sixth cell-phone will delete the cell-phone registered
most previously.
• You cannot register a cell-phone when another cell-
phone is in the hands-free connection status. End the
hands-free connection, and then register a new cell-
phone.
• If two or more "KCA-BT100" are displayed in the list of
connected units, another "KCA-BT100" is probably used
nearby. Move your car, and then check that only one
"KCA-BT100" is displayed.

Downloading the Phone Book

Download the phone book data from the cell-
phone to this unit so that you can use the Phone
Book of this unit.
1
By operating the cell-phone, end the hands-free
connection.
2
By operating the cell-phone, send the phone
book data to this unit
By operating the cell-phone, download the phone
book data to this unit.
During downloading:
"Downloading", "DOWNLOAD", or "Now
Downloading..." is displayed.
After completion of downloading (for Audio
receiver):
"Complete", "Completed", or "COMPLETE" is
displayed.
3
By operating the cell-phone, start the hands-
free connection.
To clear the downloading completion message
(for Audio receiver):
Press any button.
• For how to operate the cell-phone, refer to the
Instruction Manual that comes with your cell-phone.
• Up to 300 phone numbers can be registered for each
registered cell-phone.
• Up to 32 digits can be registered for each phone number
along with up to 40 characters representing a name.
• Depending on the type of your cell-phone, the following
restrictions are placed:
- The phone book data cannot be downloaded
normally.
- Characters in the Phone Book are garbled.
- The phone book data cannot be downloaded normally
if it contains images. It may take several hours to a full
day to download the phone book depending on the
total image size.
• To cancel downloading of the phone book data, operate
the cell-phone.
5
|
English