Notes - Kenwood KCA-BT100 Mode D'emploi

Notes

• If you experience problems during installation,
consult your Kenwood dealer.
• When you purchase optional accessories, check with
your Kenwood dealer to make sure that they work
with your model and in your area.
• The illustrations of the display and the panel
appearing in this manual are examples used to
explain more clearly how the controls are used.
Therefore, what appears on the display in the
illustrations may differ from what appears on the
display on the actual equipment, and some of the
illustrations on the display may be inapplicable.
Kenwood Receivers available for this unit
The receiver units that can be used with KCA-BT100
are as follows: (As of September 2006)
Audio receiver
DPX501U*, DPX701U, KDC-W5534U*,
KDC-W6534U*, KDC-W7534U, KDV-5234*
Monitor receiver
DDX6029
For details on the compatible receivers to be released
in the future, access the following URL:
http://www.kenwood.com/bt/bt100/
• *: Set the display character conversion function switch to
"2". For more details, see <Display Character Conversion
Function> (page 18).
About the Remote Controller
The audio receiver requires a remote controller with
numeric buttons to enter phone numbers directly.
To make a call using the remote controller, the [
button must be provided on the remote controller.
For more details, access the following URL:
http://www.kenwood.com/bt/bt100/
• You cannot use a remote controller depending on the type
of your control unit.
4
|
English
About the Cell-Phone
This unit conforms to the following Bluetooth
specifications:
Version
Profile
For the cell-phones verified for compatibility, access
the following URL:
http://www.kenwood.com/bt/bt100/
• The units supporting the Bluetooth function have been
certified for conformity with the Bluetooth Standard
following the procedure prescribed by Bluetooth
SIG. However, it may be impossible for such units to
communicate with your cell-phone depending on its type.
• HFP is a profile used to make a hands-free call.
• OPP is a profile used to transfer data such as a phone book
between units.
This product is not installed by the manufacturer
of vehicles on the production line, nor by the
professional importer of vehicles into an EU Member
State.
Information on Disposal of Old Electrical
and Electronic Equipment (applicable for
EU countries that have adopted separate
waste collection systems)
Products with the symbol (crossed-out
wheeled bin) cannot be disposed as
household waste.
Old electrical and electronic equipment
]
should be recycled at a facility capable
of handling these items and their waste
byproducts. Contact your local authority
for details in locating a recycle facility
nearest to you. Proper recycling and waste
disposal will help conserve resources whilst
preventing detrimental effects on our
health and the environment.
Bluetooth Standard Ver. 1.2
HFP (Hands Free Profile)
OPP (Object Push Profile)