Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
6
Installation
Note:
•
We recommend that you switch off your equipment before
connecting cables in order to prevent any of the devices
being damaged.
•
At all times, avoid bending the optical (Toslink) cable as it is
very delicate.
A
u
d
o i
S
o
r u
e c
1.
Connect the Audio Source to one of the digital audio inputs
[1] on the Connect TC22
cable.
2.
Connect the Audio Amplifier to one of the digital audio
outputs [2] on the Connect TC22
coaxial audio cable.
3.
Connect the power adapter [3] and plug into the electrical
socket.
4.
Use the switch [4] to select which digital audio input (Coaxial
or Optical) is connected to the Connect TC22
5.
Switch your device on and check that the audio connection
works.
7
Usage
If the audio connection does not work (properly), consult the
instructions for the Audio Source and/or the Audio Amplifier for the
correct settings.
8
Frequently asked questions (FAQs)
Please go to www.marmitek.com if you have any questions.
6
[1]
[4]
TM
[2]
[3]
using the optical or coaxial audio
using the optical or
TM
A
u
d
o i
A
m
p
i f i l
r e
TM
.
© MARMITEK
Publicité
Chapitres
Table des Matières
