Waste Handling - Ingeteam INGECON SUN STORAGE 1Play Série Manuel D'installation

Ingeteam

24. Waste handling

These units use components that are harmful to the environment (electronic cards, batteries or cells, etc.).
At the end of the unit's life, the waste must be correctly processed by an authorized hazardous
waste management company.
Ingeteam, in accordance with its policy of respect for the environment, will inform the
authorized manager, via this Section, of the location of components to be decontaminated.
At the end of the unit's life, the waste must be processed by an authorized waste management company.
Ingeteam, in accordance with its policy of respect for the environment, will inform the authorized manager, via this
Section, of the location of components to be decontaminated.
The elements within the unit that must be handled individually are:
1. Electrolytic condensers or condensers containing PCB.
2. Batteries or accumulators.
3. Printed circuit board cards.
4. Liquid crystal displays.
Their location is shown in the following illustrations.
1
104
2
3
4
ABH2013IQM01_A - Installation and Operation Manual
Waste handling