minutes and uses from 18 to 22 litres of water depends on
the bathtub model. The rinsing process is signalled by the
top LED diode on the keypad.
It is not possible to interrupt the procedure! With reference
to the two different whirl systems this means:
Air system: Pre-rinsing: with fresh water which is directed to
the outfl ow by air ducts
Finishing rinsing: with water from water supply system, dis-
infection liquid and fi nal drying by the blower.
Whirlsystem, Whirl- +Airsystem: Pre-rinsing: the water in-
side massage jets, pipes and the whirlpool pump and circu-
GB
lates with fresh water and disinfection liquid.
The end of the fl ushing procedure is indicated by the top
LED diode on the keypad going out.
12
Ozonation (only for air system and
whirl+air system)
Ozonization is automatically activated when the blower is
turned on.
13
Manual fl ushing (only for air system
and whirl+air system)
An additional fl ushing procedure can be initiated by press-
ing the "Manual fl ushing" key. Intermediate fl ushing is only
possible if the system is not operating and the pool is empty.
The preset programme runs automatically and provides
thorough, additional system cleaning, before fl ushing clear
and drying.
This fl ushing procedure can be terminated by pressing the
key a second time.
14
Hygiene, disinfection
Scrupulous hygiene of the tub and all system compo-
nents is guaranteed by:
■ Automatic emptying of the system components and air
channels thanks to sloped alignment.
■ Automatic pre- and fi nal fl ushing with the possibility of
adding disinfectant.
Use only special Hoesch Disinfectant (500 cc dosage bottle
Art. No. 6923). It microbiologically combats fungi, algae and
bacteria. It is free of tensides and in the given concentration
ecologically harmless. It is not aggressive to the materials
used in the dosage systems. The acrylic tub surfaces are in
no way affected on contact with this disinfectant.
⚠
No liability can be accepted for damages and
risks caused by other substances not suitable
for this purpose!
26
Control panel
Adding disinfectant:
Remove sealing cover and carefully pour in disinfectant.
One full dose (approx. 50 ml) is enough for two fl ushing
procedures.
We recommend adding disinfectant:
■ before the fi rst bath
■ at least before every 10th bath with regular use
■ after longer periods of non-use
■ on excessive soiling.
15
Usage and maintenance
Usage
In general, bathing in the water massage bathtub is a relax
or great fun. However, for a small group of people it may
cause a threat to their health.
In case of doubts consult a doctor.
In case of the following group of people/users we advise
against using the water massage bathtub:
■ Babies up to 1 year old
■ People with unstable blood circulation
■ After consuming a big amount of alcohol
■ People with a cold or fl u
■ In case of problems with the heart/blood circulation
■ After a visit in sauna use the bubble bath after a longer
break during which you cool down
■ Immediately after eating
■ When the jets is used by children, they should be under
constant supervision of adults.
■ When older or disabled people with limited physical abil-
ities use the jets, special caution should be exercised.
■ Specialized companies and the fi rst user declare that
they will make the operating manual available for sub-
sequent owners and users.
The temperature of water in the jets should not exceed the
average body temperature. The ideal scope of tempera-
tures is from + 32°C to + 37°C.
For your own safety please make sure that no electric de-
vices or other current conducting elements will not fall into
the bathtub fi lled with water.
Maintenance
Additives for bathing containing solids, such as turf, oils,
etc., cannot be used. We recommend to use HOESCH
foam baths for whirltubs.