Appliance Description; Operating The Hob With The Sensor Keys - Smeg SE2931ID Instructions De Montage Et D'utilisation

Appliance description

The decorative design may deviate from the illustrations.
1. Induction cooking zone front left
2. Induction cooking zone back left
3. Induction cooking zone back right
4. Induction cooking zone front right
5. Touch-control operating panel
6. Glass ceramic hob
7. Induction cooking zone left
8. Centre induction cooking zone
9. Induction cooking zone right
10. ON/OFF key
11. Cooking zone selection key
12. Symbol for locating the position of a cooking zone on the
glass ceramic hob
13. Plus key (raise)
14. Minus key (lower)
15. Power setting display
16. Stand-by dot (cooking zone)
17. Power key
18. Timer selection key
19. Switch-off time display
20. Control lamp for locating the position of a cooking zone on
the glass ceramic hob
21. Minute minder lamp
22. STOP key
20

Operating the hob with the sensor keys

The ceramic glass hob is operated with touch control sensor
keys. The sensor keys are operated as follows: lightly touch a
symbol on the surface of the ceramic glass plate. A buzzer will
indicate when the controls have been operated correctly. The
touch control sensor key will then be indicated as "key".
ON/OFF key (10)
This key is used to switch the entire hob on and off. It is, as it
were, the main switch.
Cooking zone selection key (11) (e.g.
Pressing one of the cooking zone selection keys available will
select a cooking zone, for which the Plus key
may be used to set the cooking level.
Minus key (14) / Plus key
These keys are used to set the cooking levels, the automatic
switch-off device and the minute minder. The Minus key reduces
the setting and the Plus key raises it. The setting can be deleted
by pressing both keys simultaneously.
Power setting display
The power setting display shows the power setting which has
been selected, or:
H................ Residual heat
P................ Power boost setting
.............. Pan recognition
A................ Automatic boost function
STOP ........ Stop function
L ............... Childproof lock
.............. Keeping warm function
A cooking zone can be switched on when the stand-by dot
lights up.
Timer selection button
For programming the automatic switch-off device (timer) and the
minute minder.
Power key (17)
The power boost setting makes additional power available for
induction cooking zones.
STOP key (22)
The STOP function can be used to briefly stop the cooking
process.
GB
for front left).
or the Minus key
(13)
(15)
(18)
A
p
p l
i
a n
c
e
d
e s
c
r i
p
t i
o
n