Environmental Protection; Available Accessories - Jet Tools DDS-225 Mode D'emploi

Sander burns wood
*Depth of cut excessive for fine grit-
Use coarser grit.
*Feed rate too slow-
Increase feed rate.
*Abrasive loaded-
Reduce depth of cut, angle stock.
Clean abrasive with cleaning stick.
*Sanding paper worn-
Avoid area, reverse strip, change
paper.
*Abrasive strip overlapped-
Remove slack in strip.
Sanding marks on the wood
*Uneven federate-
Conveyor belt slipping (see above).
*Wrong grit sanding belt-
use coarser grit for stock removal
and fine grit for finish sanding.
*Machine vibrations (see above)
Tapered thickness across face
*Different height setting of rear drum-
Make equal setting on both sides.
*Conveyor table not parallel to drum-
Correct table parallelism.

10. Environmental protection

Protect the environment.
Your appliance contains valuable
materials which can be recovered or
recycled. Please leave it at a
specialized institution.

11. Available accessories

Stock number 60-0505
Cleaning stick.
Stock number 708119
Mobile base up to 500kg
for DDS-225 only.
(Pair of rails 708116 needed)
Stock number 708116
Pair of Rails 915-1165mm
Refer to the JET-Pricelist
for various grit sanding belts.
9