Before The First Use - Domo DO7292S Mode D'emploi

PARTS
1. Handle
2. On/off button
3. Button to set the suction power
4. Button for cord roll-up system
5. Air outlet with HEPA filter
6. Storage position
7. Button to remove the dust reservoir
8. Dust reservoir
9. Connector for the hose
10. Flexible hose
11. Handle for hose with valve
12. Telescopic tube
13. Sliding button for tube length
14. Floor nozzle
15. Button to extend/retract brushes
16. Crevice vacuum cleaner
17. Furniture nozzle
18. Hard floor brush
2

BEFORE THE FIRST USE

Always unplug the appliance from the socket before removing or connecting parts. Make sure that the
dust reservoir is always in the correct position.
FLEXIBLE HOSE
· Assembly: Insert the flexible hose coupler into the connection opening at
the front of the vacuum cleaner and tighten.
· Disassembly: To unlock, unscrew the flexible hose from the connection
opening at the front of the vacuum cleaner.
TELESCOPIC TUBE
1. Put the handle of the hose into the telescopic tube.
2. Set the telescopic tube to the desired length. For this, push the slide button upwards and pull on the
upper part of the tube to extend it. Release the slide button and let the tube snap into place.
3. Attach the floor nozzle to the telescopic tube by firmly sliding the tube into the nozzle.
26
DO7292S
4
6
3
11
12
10
13
1
7
8
9
14
15
18
5
17
16