POLO HI-Q TOOLS III Mode D'emploi page 4

HI-Q TOOLS MOUNTING STAND III
Ord. Nr. 60150700070
CONTENT
1 mounting stand
2 rubbered swing arms
2 racing adapters (V-forme)
The HI-Q TOOLS mounting stand III simplifi es a lot of reparation and mounting work on your
two-wheeler. Modern motorcycles often have a high empty weight of several hundred kilogramms.
Therefore please use the HI-Q TOOLS mounting stand III always with the greatest care in accordan-
ce to these operating instructions and the manufacturer's specifi cations to avoid damage on your
two-wheeler and injuries on involved persons. The HI-Q TOOLS mounting stand III with the delivered
swing arm supports is only appropriate for jacking up motorcycles with rear swing arm with straight
box profi le.
Never use the HI-Q TOOLS mounting stand III for other purposes.
ASSEMBLY
The HI-Q TOOLS mounting stand III is ready as soon as the supports (pointing inwards) are put into
the open bars of the lift and fi xed with the screws (on each side) possible widths: with rubbered angle
22-31cm, with racing adapter 21-34 cm. The self-locking nuts of the safety srews are tightenend
gently without tightening the profi le of the stand. If the swingarm has a thread support, we recommend
to use the optionally available racing adapter with castors (view abbove).
If there is a swing arm with straight box profi le with thread supports, use the rubbered swing arm sup-
ports (included in the delivery). The HI-Q TOOLS mounting stand III is not appropriate for triangle swing
arms or hooked „banana swing arms" without thread supports or one arm swing arms.
USE
Before using the HI-Q TOOLS mounting stand III check if your motorcycle generally fulfi ls the condi-
tions to be lifted by the HI-Q TOOLS mounting stand III.
The max. load capacity is 150 kg – therefore the total weight of the two-wheeler incl accessories may
not exceed 300 kg. The rear swing arm has to be appropriate for the lift (no construction forms as de-
scribed above). If the rear swing arm shall be demounted, the axle has to be loosened before jacking
up the motorcycle. The same is valid for other tightened boltings on the two-wheeler. Never jack up
the motorcycle alone – let yourself help by a second strong person, keeping the motorcycle on the
handlebar in vertical position. Lifting the two-wheelers if it is standing inclined on the side stand, can
damage the HI-Q TOOLS mounting stand III and may cause that the vehicle slips off.