DJ-Tech MIX FREE Manuel D'utilisation page 6

FUNCTIONS
1. EFFECT ON BUTTON. Press this button to turn on/off the Effect Mode. When in Effect
mode, the button will be lightened in red, and the 2 PITCH FADERS (No. 7) and the 4
BEND BUTTONS (No. 8) will be used for decks effect selection and control.
2. POWER SWITCH. To turn on/ off the unit.
3. BEATMATCH LED. These 8 LEDs are used to show the beat of the Deck A and Deck
B currently playing tracks. The lights jump according to the beat LEDs in Deckadance.
4. HOLD SWITCH. Press this switch to enable hold mode. In hold mode, all the controls
on the unit will be locked, but LEDs and 2 displays will still show the playback status.
5. LCD DISPLAY. These 2 LCD displays show the current track info and playlist.
6. MONITOR BUTTON. Toggle monitor function for the deck.
7. PITCH FADER. When the effect mode is off, it is used to adjust the pitch of the deck.
When the effect mode is on, it is used to control the X-Parameter (horizontal) of the
effect on both decks. (The PITCH FADER of deck B will be used to control the Y-
Parameter (vertical) of the effect on both decks.)
8. PITCH BEND BUTTONS. When the effect mode is off, these buttons are used as pitch
bend function. When the effect mode in on, they are used for effect selection of the
deck effect.
9. SCROLL CLICK WHEEL. Use this scroll wheel to select songs in Deckadance Playlist.
The LCD display will show the playlist accordingly. Click the wheel to load the selected
song to the deck.
10. SAMPLE/ AUTO LOOP SELECT BUTTON. Press this button to switch between
Sample Playback or Auto Loop mode for the 4 buttons in No. 11. Corresponding LED
will be lightened for the current mode.
11. SAMPLE/ AUTO LOOP BUTTONS.
In PLAY SAMPLE mode, these 4 buttons are used to play the samples of Slot 1 to 4
-
of the samplers in Deckadance. (Slot 5 to 8 samplers for the 4 buttons in deck B)
In AUTO LOOP mode, these 4 buttons are used to activate the Auto Loop function
-
of the deck with different length.
12. MULTI-FUNCTION JOG WHEEL.
When Scratch Mode is off, the jog wheel is used for quick search in the playing
-
song.
When the Scratch Mode is on, the jog wheel is used for scratching.
-
13. SYNC BUTTON. SYNC function in the software.
14. CUE BUTTON. CUE function in the software.
15. PLAY/ PAUSE BUTTON. PLAY/PAUSE function in the software.
16. SCRATCH ON BUTTON. Toggle the Scratch Mode for the jog wheel. When Scratch
Mode is on, the LED will be on.
17. AUTO MIX BUTTON. Press this button to activate Auto Corssfader function to mix to
deck A or to deck B.
18. VOLUME FADER. Control the volume faders in software.
Mix Free Controller
5