Network Settings - NEC MultiSync E657Q Manuel D'utilisation

Example 2: When the IP address of the monitor is "192.168.73.1", access is
gained to the mail alert settings by specifying
http://192.168.73.1/index.html for the address or the entry column
of the URL.
Operation
Access the following address to show HOME.
http://<the Monitor's IP address>/index.html
Click each link on the left column below HOME.
NOTE: Function of buttons which are shown on setting pages.
[APPLY]: Save your settings.
[CANCEL]: Return to the previous settings.
[RELOAD]: Reload the settings.
[RESET]: Resets to the initial setting.

Network Settings

Click on "NETWORK" on the left column below HOME.
DHCP
IP ADDRESS
SUBNET MASK
NOTE: CANCEL is disabled after clicking APPLY.
Select an option for setting the IP ADDRESS.
On: Automatically assign an IP address.
Off: Manually set an IP address for the monitor
connected to the network.
Manual DNS:
Set your IP address for the monitor connected to the
network when [Off] is selected for [DHCP].
Set your subnet mask data for the monitor connected
to the network when [Off] is selected for [DHCP].
Français-60
Manually set an DNS Primary and
DNS Secondary address for the
monitor connected to the network.
The DNS server connected to the
monitor will automatically assign its
IP address.