Tips For Use; 4/Caring For And Cleaning Your Appliance; Cleaning The Blender - Brandt BLE615EG Manuel D'instruction

While the motor is running, you can add ingredients:
1. To remove the lid, turn it counter clockwise.
2. Add the ingredients into the jar through the opening in the lid.
•
When you have finished, switch off the blender by unplugging it.
•
To put out the contents of the jar, remove the lid from the jar and remove the jar from the motor
base before putting out the contents of the jar.
The temperature for the food to be mixed shall not exceed 60°C.
The volume of food to be processed shall not exceed the maximum mark level on the blender
jar.
B. Tips for use
If you are not satisfied with the result of your preparation, the following tips might help:
•
To achieve the best results when pureeing solid ingredients, place small portions into the
glass jar one by one instead of placing a large quantity all at once.
•
If you are processing solid ingredients, cut them into small pieces (2-3cm) first.
•
When mixing solid ingredients start off first with a small amount of liquid. Gradually add more
and more liquid through the opening in the lid.
•
Always place your hand on top of the blender when you are operating the device.
•
For stirring solid or very thick liquid ingredients we recommend that you use the blender in
impulse mode to prevent the blades from becoming stuck.

4/CARING FOR AND CLEANING YOUR APPLIANCE

A. Cleaning the blender
The appliance is easier to clean if you do so immediately after use.
1. Unplug the appliance, remove the jar, remove the blending
blade assembly from the jar by carrying out the assembly
procedure in reverse order (see the section "2/ C. Assembling
the blender").
14