Caring For The Blender; Troubleshooting; Warranty And After Sales Service - Brandt BLE615EG Manuel D'instruction

Note: It is necessary to use the spanner (9) for remove the
blade unit: screw clockwise, then pull off the blade unit easily.
2. Clean these parts with the cleaning brush in warm water with some washing-up liquid and rinse
them under the tap.
3. Clean the motor base with a dry cloth. Do not submerge the motor base in water or in any other
liquid, and do not place it under the tap.
You can clean the glass jug automatically if you wish. Put water and a little detergent into
the jar and press the "Clean/Pulse" button. The jar will be cleaned automatically.
It may also be washed in the dishwasher.
Avoid touching the sharp blades, especially when the appliance is plugged in.
The glass jar should not be subject to large temperature variations.
B. Caring for the blender
1. Store the appliance in a dry environment.
2. Never put the jar, or any other parts, in a microwave oven.
C. Troubleshooting
1. If, during use, the product is subjected to such abnormality as noise, smell, smog and increased
temperature, disconnect the power supply and stop the use.
2. In case the appliance fails to work, please check whether the power supply is properly connected,
whether the switch is rotated to the on position and whether the fittings are in place.
3. If the appliance can not still function well after the above in actions, consult the after sale service
of your retailer.
D. Warranty and after-sale service
This product is covered by a 2-year warranty from your retailer. For more details, please refer to the
warranty conditions supplied by your retailer.
FagorBrandt SAS – Management Company - SAS with a capital of 20,000,000 euros
- Head Office: 7 rue Henri Becquerel - 92500 Rueil-Malmaison - RCS Nanterre 440 303 196
15