Service And Maintenance - Altrad Belle MPC 300 Manuel De L'opérateur

Maintenance
The Altrad Belle 'MPC300' is designed to give many years of trouble free operation. It is recommended that an approved Altrad Belle
dealer carries out all major maintenance and repairs. Always use genuine Altrad Belle replacement parts, the use of spurious parts may
void your warranty.
Before any maintenance is carried out on the machine, switch off the engine and disconnect the HT lead from the sparkplug.
Running In Period
minutes.
Routine Maintenance
Engine Oil
Air Filter
Spark Plug
Drive Belt
Drive Belt
approximately 5mm.
If the belt tension requires adjustment, loosen the four drive belt adjustment bolts enough to allow
the engine to be moved. Adjust the engine's position by sliding the engine assembly forwards or
backwards on the baseplate. Once set, retighten the drive belt adjustment bolts and re-check the
belt tension.
Check the pulley alignment. If the alignment is incorrect, loosen the taperlock bushes and move
the pulley to suit. Once the pulley is aligned, retighten the taperlock bushes. Replace the belt
Vibrator Unit.
Oil / Fuel Type & Quantity - Spark Plug Type
Petrol Honda GXH50

Service and Maintenance

Change
Check Condition
Clean / Replace
Change
Tension
Quantity
Oil Type
First 4
Hours
Fuel Type
(Litre)
Unleaded
11
First Month / 3 Months / 50
20 Hours Hours
Drive Belt
Adjustment
Drive Belt
Tension
Capacity Spark Plug
(Litre) Type
BmR4a
GB
6 Months /
100 Hours
Electrode
Gap (mm)