Dino-Lite Medical Manuel D'utilisation page 17

Software interface DinoXcope / Mac
There are four main sections in the DinoXcope program window:
1. Action bar
• Make picture. If you want to make measurements on the
picture later, open the picture by double clicking and add
the input magnification that you read from the focus dial.
• Make video. Choose frame rate, recording time, quality and
compression. To stop recording manually, use the ESC key
• Make time lapse video. Choose capture interval, number
of frames and playback frame rate, as well as quality and
compression.
• Switch LED's on/off
• Go to full screen mode, to end full screen mode use the
ESC key
2. Image list
• Choose between pictures or video's
• Look at an image with mouse-over, or double-click to open
in new window
Dino-Lite Medical User Manual
English 15