Hardware Installation - Dino-Lite Medical Manuel D'utilisation

Dino-Lite Medical User Manual
1. Use the CD delivered with your Dino-Lite to install the
DinoCapture and DinoXcope software and drivers. Alternatively,
download and run the latest version of the software from the
support section of the website: www.dino-lite.eu.
2. Click 'Next' and the Installshield wizard will start. (An 'Open
File-security warning' may appear on some systems.
Select 'Run' or 'YES'). Choose the language you want for the
DinoCapture 2.0 interface.
3. Read the User License Agreement. If you agree, press 'Yes' to
continue or press 'no' to stop the installation.
4. Select a destination folder for the DinoCapture software. When
done, press 'Next'. Click 'Install' to start installing the software.
If the Windows security warning message appears, click 'Install
this driver software anyway'.
5. When the installation is complete, selecting 'Finish' completes
the software installation.
6. The DinoCapture software has an auto-update feature that will
check for software updates when you start DinoCapture.
7. A full manual can be found in the help function of DinoCapture,
as a pdf on the CD or on the website.

Hardware installation

1. After full installation of the DinoCapture software and driver
package, connect the Dino-Lite to one of the USB ports of your
computer.
2. Please use a USB 2.0 port that is fully powered. Some USB ports
on portable computers do not supply sufficient power.
3. The driver will be automatically installed. Please WAIT until
the notification appears: 'Device driver software installed
successfully'.
4. Now start DinoCapture 2.0 by double clicking on the desktop icon.
5. The LED lights should go on and an image should appear in
DinoCapture. If this is not the case, refer to the frequently-
asked-questions (FAQ) on www.dino-lite.eu.
8 English