Dino-Lite Medical Manuel D'utilisation page 15

Measurement options
Measure ment
properties
Magnifier
Magnifi cation
Units
Calibration
menu
Barcode Reader Click on the icon to enable and disable barcode
Preview window tools
Organize and show the status of all the
measurements as well as the ability to adjust
how the results are shown on the image.
Digitally enlarge the area around your
mouse pointer for more details and accurate
measurements.
Input the magnification in the blue box. The
magnification can be read from the dial on the
microscope.
Select the unit of measurement, inch, mil, mm or
um.
Select calibration, create new calibration profile
or open the calibration folder.
detection.
MicroTouch - this is activated when you touch
the MicroTouch sensor. Activate or deactivate the
MicroTouch. Some Dino-Lite models do not have
this feature.
Auto Exposure – This allows you to change the
exposure or turn off auto exposure. Sliding the bar
to the right increases the exposure time and vice
versa.
White Balance - Select the required White Balance
Mode (available on certain models only)
Dino-Lite Medical User Manual
English 13