Tub Clean - LG WD-1259RD Manuel D'utilisation

H ow to use washer

Tub Clean

Tub Clean course can be set by pressing and
holding Tub Clean button simultaneously.
TUB CLEAN is special cycle to clean the
inside of the washer. This cycle uses higher
water level with higher spin speed. Perform
this cycle regularly.
How to use the Tub Clean cycle:
1. Remove any clothing or items from the
washer and close the door.
2. Open the dispenser drawer and add Anti
limescale (Calgon) to the Main wash
compartment.
NOTE: Do not add any detergent to the
detergent compartments. Excessive
suds may generate and leak from the
washer.
3. Close the dispenser drawer slowly.
4. Power On and then press and hold Tub
Clean button for 3 seconds.
5. Press the Start/Pause button to start.
6. After the cycle is complete, leave the door
open to dry around the washer door
opening, flexible gasket and door glass.
CAUTION
!
If there is a small child, be careful not to
leave the door open for too long.
Intensive
• When washing full load or heavily soiled
laundry, you can increase effectiveness by
choosing intensive option.
• By selecting the Intensive option, the wash
time may be extended, depending on the
program selected.
• To use this option press the Intensive button
once before the wash program is started.
Door Lock
• Lights whenever the door of the washer is
locked.
• The door can be unlocked after a 2~3
minute delay, pressing the Start/Pause
button to stop the washer.
Detecting
• While the "Detecting" is shown in the display
the machine rotates slowly and detects how
many laundries are loaded in the drum. It
will take a few seconds.
21