Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Product Dimensions
30" (76.2 cm) Cooktops
B
A
Models JIC4430
Model ICI500
and GCI3061
A. 21⁵⁄₁₆" (54.1 cm)
A. 20¹⁄₈" (51.0 cm)
B. 30⁵⁄₁₆" (77.0 cm)
B. 30⁵⁄₁₆" (77.0 cm)
C. 2³⁄₈" (6.0 cm)
C. 2³⁄₈" (6.0 cm)
36" (91.4 cm) Cooktop
B
A
Models JIC4536
and KICU569
A. 21⁵⁄₁₆" (54.1 cm)
B. 36⁵⁄₁₆" (92.0 cm)
C. 2³⁄₈" (6.0 cm)
Cabinet Dimensions
IMPORTANT: If installing a range hood or microwave hood
combination above the range, follow the range hood or
microwave hood combination installation instructions for
dimensional clearances above the cooktop surface.
C
Models KICU500
and KICU509
A. 21⁵⁄₁₆" (54.1 cm)
B. 30³⁄₄" (78.2 cm)
C. 2³⁄₈" (6.0 cm)
A. 29½" (75.0 cm) on 30" (76.2 cm) models
B. Combustible area above countertop (shown by dashed box above)
C. 30" (76.2 cm) minimum clearance between top of cooktop platform
C
D. 13" (33.0 cm) recommended upper cabinet depth
E. 2" (5.1 cm)
F. 19⁵⁄₁₆" (49.0 cm)
G. 18" (45.7 cm) minimum clearance from upper cabinet to countertop
H. Junction box or outlet; 12" (30.5 cm) minimum from bottom of
I. Junction box or outlet; 10" (25.4 cm) from right-hand side of
J. 29½" (75.0 cm) on 30" (76.2 cm) models
K. 1" (2.5 cm) minimum distance to nearest left and right side
L. 1" (2.5 cm) minimum clearance between back wall and countertop
NOTES: After you make the countertop cutout, some installations
may require notching down the base cabinet side walls to clear
the cooktop base. To avoid this modification, use a base cabinet
with sidewalls wider than the cutout.
If cabinet has a drawer, a 5¹⁄₈" (13 cm) depth clearance from the
countertop to the top of the drawer (or other obstruction) in base
cabinet is required.
For proper ventilation, provide a vent of ³⁄₁₆" (5 mm) under the
countertop, in the front of the cabinet. The clearance should be
the length of the cooktop cutout.
A
B
C
L
E
K
33¹⁄₁₆" (84.0 cm) on 36" (91.4 cm) models
and bottom of uncovered wood or metal cabinet (24" [61 cm]
minimum clearance if bottom of wood or metal cabinet is covered
by not less than ¹⁄₄" [0.6 cm] flame retardant millboard covered with
not less than No. 28 MSG sheet steel, 0.015" [0.04 cm] stainless
steel, or 0.024" [0.06 cm] aluminum or 0.020" [0.05 cm] copper)
within minimum horizontal clearances to cooktop
countertop
cabinet
33¹⁄₁₆" (84.0 cm) on 36" (91.4 cm) models
combustible surface above cooktop
D
F
G
H
I
J
³⁄₁₆" (5 mm)
3
Publicité
Table des Matières
