Publicité
About the water temperature setting.
Temperature setpoint:
recommended starting temperature setting.
NOTE:
Hot water capacity:
Time/Temperature Relationship in Scalds
120 F (49 C)
125 F (52 C)
130 F (44 C)
135 F (57 C)
140 F (60 C)
145 F (63 C)
150 F (66 C)
155 F (68 C)
Table courtesy of Shriners Burn Institute
Risk of Scalding Reminder:
panel.
Mixing-valves:
DANGER:
There is a hot water scald potential if the
water temperature is set too high. Households with small children,
disabled, or elderly persons may require a 120°F (49°C) or lower
thermostat setting to prevent contact with HOT water.
To Adjust the Temperature
to desired temperature.
Note:
DANGER:
There is a Hot Water scald Potential
if the water temperature is set too high. 120°F (49°C) is the
recommended starting point for water temperature setting,
but it can be adjusted to any temperature between 100°F and
140°F (38°C and 60°C).
G eo S pring
P
EAT
UMP
H
H
YBRID
D
IGH
EMAND
H
E
LECTRIC
ACATION
V
Mode
Hold for
°F/°C
GEAppliances.com
°F
Enter
°C
D
AYS
/B
OOST
/S
TANDARD
Anode
Power
Filter
Saver
Hold to
Hold to Override
Reset
PS-Power Saver
7
Publicité
Chapitres
Dépannage
