Accessories; Installing The Refrigerator - Dometic GROUP RMD10 Série Instructions De Montage

Accessories

3 Accessories
Description
Seal for draft-proof installation for gaps of 1 – 5 mm (0.04 – 0.2 in.) (fig. 7 B, page 7)
Seal for draft-proof installation for gaps of 5 – 10 mm (0.2 – 0.39 in.) (fig. 7 C, page 7)
Winter cover LS300 for the ventilation grill
Optional Battery Pack R10-BP for stand-alone gas operation
4

Installing the refrigerator

You find the instructions manual for changing the door lock and the
decorative plate online at:
documents.dometic.com/?object_id=63258
The device is suitable for installation in:
• caravans
• motor homes
The refrigerators outlined herein have been design certified by the CSA under the
current edition of ANSI Refrigerator Standard for installation in a mobile home or
recreational vehicle. The certifications are, however, contingent on the installation
being made in accordance with the following instructions as applicable.
In the USA, the installation must conform with:
• National Fuel Gas Code ANSI Z223.1 – (current edition)
• Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280
• Recreational Vehicles ANSI A119.2 – (current edition)
In Canada, the installation must conform with:
• Current CSA B 149.1 Natural Gas and Propane Installation Code
• Current CSA Standard Z 240.4 GAS-EQUIPPED RECREATIONAL VEHICLES
AND MOBILE-HOUSING
• Any applicable local code
16
RMD10
EN