Assembly And Operation; Applications; Removal And Installation Method Of Battery - Metabo HPT M 1808DA Instructions De Sécurité Et Mode D'emploi

SPECIFICATIONS
1. Cordless trimmer
Model
Motor
Collet chuck capacity
No-load speed
Type
Battery
Voltage
Weight
NOTE
Available bit: Straight bits, Flush trimming bits, Chamfering bits, Round-over bits, Rabbeting bits, Dovetail bits.
2. Battery Charger
Model
Input power source
Charging time
(At a temperature of 68°F (20°C))
Charging voltage
Charging current
Weight
NOTE: The charging time may vary according to temperature and power source voltage.

APPLICATIONS

○ Woodworking jobs centered on grooving and
beveling.
For example, grooving beveling, cutting, copying,
engraving, shape cutting, combinations and others.
REMOVAL AND INSTALLATION METHOD
OF BATTERY
○ How to install the battery.
Align the battery with the groove in head cover and
slip it into place.
Always insert it all the way until it locks in place with a
little click. If not, it may accidentally fall out of the tool,
causing injury to you or someone around you (Fig. 5).

ASSEMBLY AND OPERATION

M1808DA
DC brushless motor
1/4" (6.35 mm), 3/8" (9.5 mm)
10,000–30,000 /min
Li-ion battery Model BSL1815 / BCL1830C
DC 18 V
3.5 lbs (1.6 kg)
(BSL1815 and dust collector attached)
UC18YSL3
Single phase: AC 120 V 60 Hz
BSL1815: Approx. 15 min
BSL1830C: Approx. 30 min
DC 14.4 – 18 V
DC 8.0 A
1.3 lbs. (0.6 kg)
○ How to remove the battery.
Withdraw battery from the head cover while pressing
the latch (2 pcs) of the battery (Fig. 5).
Battery
Head cover
Push
English
Insert Pull out
Latch
Fig. 5
9