Tone Generator - SEFRAM 97 Manuel D'utilisation

● The flashlight function for easier cable tracing in the
dark.

3. TONE GENERATOR

A. Features
● Red and black test leads with a standard 4 conductor
modular cord and plug.
● A 3-position toggle switch controls the modes of
operation and two bi-colored LEDs display line
polarity for Lines 1 and 2. (Figure 2)
● The tone and continuity (cont.) test functions are only
applied to Line 1 using the modular plug.
● A tone selector switch located inside the test set is
provided for choosing either a fast dual alternating
tone or a slow dual alternating tone.
(CAUTION: DO NOT CONNECT TO AN ACTIVE AC
CIRCUIT EXCEEDING 24V IN THIS MODE.)
Figure1
-3-