Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Using the steering wheel remote
control
When using the steering wheel remote
control
Installation of the connection cable RC-SR1 is
required before use.
1
Select [Settings] [System] [Steering
Wheel Settings].
2
Set the [Custom] switch to [On].
You can make the registration to enable the
steering wheel remote control.
When the registration is complete, the steering
wheel remote control becomes available.
Notes on installing the connection cable
RC-SR1
REMOTE IN
Black
Green
Brown
• Refer to the support site for details, then connect
each lead properly to the appropriate leads.
Making an improper connection may damage the
unit.
URL: https://www.sony.com/am/support
• Consulting the dealer or an experienced
technician for help is recommended.
• When connecting the iDataLink Maestro module
(not supplied), do not connect any device to the
REMOTE IN terminal (blue). Likewise, when
connecting a device to the REMOTE IN terminal
(blue), do not connect the iDataLink Maestro
module (not supplied) to the IDATA LINK I/F
terminal (black).
When using an adaptor for the steering wheel
remote control
Depending on the type of car, use an adaptor for
the steering wheel remote control (not supplied).
1
Select [Settings] [System] [Steering
Wheel Settings].
2
Set the [Custom] switch to [Off].
The adaptor for the steering wheel remote
control is enabled.
GND
Input 1
Input 2
Installation
To install the unit and the display securely, be sure
to follow the steps to in order.
Before mounting the unit (page 17)
Mounting the unit in the dashboard (page 18)
Setting up the display (page 18)
Making sure the mounting positions of the
display (page 21)
Attaching the display to the unit (page 21)
For your safety
After mounting the display to the unit, make sure
that the display does not interfere with normal
driving operations such as blocking the driver's
view or getting the cables tangled.
Before mounting the unit
Before mounting the unit in the dashboard, arrange
the USB extension cables.
1
Connect the USB Type-C extension cable
to the USB port.
2
Tighten the screw firmly on the USB cable
holder to secure the USB Type-C
extension cable .
17
GB
Publicité
Table des Matières
