Publicité
Les langues disponibles
Les langues disponibles
Hinweis: Informationen zu autori-
sierten LGB-Werkstätten in aller
Welt finden Sie im Internet unter
www.lgb.de.
VORSICHT! Dieses Produkt ist
nicht für Kinder unter 8 Jahren
geeignet. Bewahren Sie Ver-
packung und Bedienungsanlei-
tung auf.
LGB,
LEHMANN
LEHMANN TOYTRAIN-Schriftzug
sind eingetragene Warenzeichen
der Firma Ernst Paul Lehmann
Patentwerk, Nürnberg, Deutsch-
land. Andere Warenzeichen sind
ebenfalls geschützt. Produkte und
technische Daten können sich
ohne Vorankündigung ändern.
© 2000 Ernst Paul Lehmann
Patentwerk.
USA
GB
55025
MTS Switch Decoder
THE PRODUCT
Use the MTS Switch Decoder to
set switches, signals and acces-
sories with the LGB Multi-Train
System. Power and commands
are carried by the track, elimina-
ting long and complex wires.
Switch decoders can be program-
med and controlled from the
55015 Universal Remote. You can
also control, but not program,
switch decoders with the 55070
MTS Feedback Interface or from
your PC (with 55060 MTS Com-
puter Interface).
The switch decoder has four ter-
minals to control up to four swit-
ches, signals or accessories.
Each terminal has four settings:
- normal (for switches, signals
- synchronous flashing (for lights)
- asynchronous flashing (for
- On/Off (for lights and other
und
der
You can use up to 32 switch deco-
ders (to control up to 128 swit-
ches, signals and accessories) on
your Multi-Train System layout.
The MTS Switch Decoder is wea-
ther-resistant and can be used
outdoors.
Hint: The MTS Switch Decoder
cannot be used with the MTS
"analog control" (7+1) option.
Attention! Use this product only
with the LGB Multi-Train System.
THE PROGRAM
With this product, we recommend
the following items:
- 50130 Orange/White 2-Wire
- 50160 Track Power Cable
- 55015 Universal Remote
- 55060 MTS Computer Interface
- 55070 MTS Feedback Interface
For information on the complete
LGB program, see the LGB cata-
log.
INSTALLATION
On the switch decoder, there is a
twelve-pole connector (Fig. 1):
- Connect the red and blue
- Connect your switches, signals
- On the left, there are two
Switch decoder addresses
Similar to the decoders in loco-
motives, switch decoders are
assigned addresses. Each switch
decoder has four addresses to
control four switches, signals or
and other EPL accessories)
lights)
accessories)
Cable, 20 m
terminals marked "IN" on the
right end of the connector to
the tracks of your layout.
and accessories to one set of
orange/white terminals (A - D).
terminals marked "Prog" for pro-
gramming the switch decoder
with the 55015 Universal
Remote.
7
Publicité
