Publicité
Les langues disponibles
Les langues disponibles
User Manual
Introduction
Thank you for purchasing the Lindy USB 3.1 Type C Notebook Docking Station. This product has been
designed to provide trouble free, reliable operation. It benefits from both a LINDY 2 year warranty and free
lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future
reference.
The Lindy USB 3.1 Docking Station features all the interfaces needed for a standard workstation making
it a great space saving addition to any hot desk environment. By connecting a single USB 3.1 Type C
cable to a notebook you can quickly access a variety of essential ports, which in turn can be connected to
one or two displays, keyboard, mouse, speakers/headset, external storage and LAN. The same USB Type
C cable is also able to provide power to compatible notebooks using USB power delivery. The Docking
Station can be connected to either a single HDMI, DisplayPort or VGA display, or if required, to two of
these displays (at a reduced resolution).
Package Contents
•
USB 3.1 Type C Notebook Docking Station
•
USB 3.1 Gen 1/3.0 Type C cable (appr. 0.3m)
•
20V 3.6A Power Supply with DC connector (5.5mm/2.5mm) & Power Cable with IEC C7 connector
•
This Manual
Specification
▪
Host Interface: USB 3.1 Gen 1 / 3.0 (Type C) with upstream Power Delivery up to 100W
•
Connects an HDMI and/or DP and/or VGA display to your notebook/PC
•
Max. resolutions: HDMI or DP (one monitor only) 3840x2160p@30Hz, VGA: 1920x1200@60Hz
•
Max. resolution for simultaneous use of two displays: 1920x1080@60Hz
•
5 Port USB 3.1 Gen 1/USB 3.0 5Gbps Hub: 4x USB Type A (2 support BC 1.2 charging) and 1x USB
Type C (Power delivery and data transfer combined)
•
Supports Gigabit Ethernet 10/100/1000Mbps
•
1x 4 segments combo Audio port (1x in, 1x out), 1x 3 segments combo Audio port
•
Chipsets: VL101R, PS8339, ANX9833C, GL3523S, VL813, RTL8153
•
Compatible with computers with USB 3.1/Thunderbolt 3 Type C interface and DisplayPort Alternate
mode
Installation
Connect the Notebook Docking Station to your computer, using the supplied USB 3.1 Type C cable. Any
required drivers will be automatically downloaded from the internet.
Connecting Devices to the Docking Station:
•
Displays: Using an appropriate HDMI and/or DisplayPort and/or VGA cable as required, connect your
monitor/s to the HDMI/DP/VGA port on the docking station.
•
Ethernet: Use a standard RJ45 Ethernet cable to connect the docking station to your network
•
USB: Up to five USB devices can be connected to the Docking Station
•
Using either a USB Type A cable (4 ports), with 2 USB Type A ports (next to the headset and host
port) supporting BC 1.2 standard for faster charging of mobile devices
•
Using a USB Type C cable (1 port, for data and Power Delivery)
•
Audio: Front stereo port supports both microphone and headphone, rear stereo port supports headphone
& speaker box.
English
Publicité
