Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
0 dB
Inputs
-6 dB
Tuner Out
TYPE: YS1029
CAUTION: REPLACE WITH
SAME TYPE FUSE AND RATING
230V
ATTENTION: UTILISER UN FUSIBLE DE
50Hz 1,3A
RECHANGE DE MEME TYPE ET CALIBRE
FUSE:
The Traynor YBA200 by Yorkville Sound
Thank you for choosing the Traynor YBA200 All-Tube Bass Amplifier. You are about to revisit one of the best
quality-of-sound instrument amplifiers ever built.
The YBA200 is truly an evolution of technology. In true Traynor all tube tradition, no semiconductors are in the
signal path and features like a Resonance control adjusts the damping factor at the amplifier's output stage (allowing
the player to take full advantage of the tonal capabilities of instrument speaker cabinets). Modern technologies, such
as specially designed toroidal transformers, allow increased reliability and real vintage tube sound, unheard of in
modern tube amplifiers. The YBA200 has real vintage tube sound, no compromises, no excuses.
Features
• Two 12AX7 pre-amp tubes, a 12AU7 phase-splitter, and four 6550 power output tubes
staying true to the All-Tube Signal Path Traynor philosophy. Class A/B amplification.
• Variable-range 3-band passive tone stack EQ with Scoop and Resonance Controls
• Unity gain, balanced DI output. Selectable Pre-EQ or Post-EQ, –20 dB pad and Ground
Lift.
• Pre-Amp Out and Power Amp Input jacks. These jacks are capable
of acting as a pre-amp, a slave amplifier or an effects loop (for
professional-grade signal processing equipment).
• Tuner Out jack and Mute switch.
• Extremely lightweight due to specially designed toroidal
transformers and technology optimization.
5
5
5
0
10
0
10
0
10
0
Bright
Gain
Treble
Mid
Range
Mute
Bassmaster
YBA200
ALL
TUBE
A-Z538R / PR1.6
SPLITTER
PREAMP
120VAC
60Hz 2.5A
12AU7
12AX7
12AX7
T3,0A L
FUSE:
T6.3A L SloBlo
Bassmaster
YBA200
POWER
ALL
6550
6550
6550
6550
TUBE
DISCONNECT POWER WHEN
REPLACING TUBES
DÉBRANCHÉ L'APPAREIL AVANT
DE REMPLACER LES LAMPES
5
5
5
5
10
0
10
0
10
0
10
Active
Bass
Scoop
Resonance
Pre-EQ
-20 dB
Pre-Amp
Post-EQ
Pad
Out
Bal Line Out
4-ohms
ALL Speakers Connected
ATTENTION: Before powering unit on,
make sure speakers are connected
1
5
Power
ON
0
10
Master
Standby
OFF
Ground
lift
Amp In
gnd
Speaker Load
8-ohms
Speaker Load with
DESIGNED & MANUFACTURED BY
YORKVILLE SOUND • Toronto, CANADA
Publicité
Table des Matières
