Esoteric Grandioso D1 Mode D'emploi page 18

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Connecting with a computer and playing back audio files (continued)
1
Connect this unit to the computer using a USB cable.
Use a cable that matches the USB port on this unit.
2
Turn the computer on.
Confirm that the operating system has started properly.
3
Press the POWER button to turn the unit on.
18 18
4
Press the INPUT selection button to select USB.
5
Start playback of an audio file on the computer.
For better audio quality, set the computer volume to its maxi-
mum and adjust the volume of the amplifier connected to this
unit. Minimize the amp volume before starting playback and
gradually increase it.
o The computer cannot be used to control this unit, nor can
this unit be used to control the computer.
o This unit cannot transmit audio files to the computer by USB.
o Do not do any of the following when playing back audio
files over the USB connection. Doing so could cause the
computer to malfunction. Always quit the audio playback
software before conducting any of these operations.
• Disconnecting the USB cable
• Turning this unit off
• Changing the input
o Computer operation sounds will also be transmitted when
playing back audio files over the USB connection. To avoid
outputting these sounds, make the necessary settings on
your computer.
o If you start the audio playback software before connecting
this unit with the computer or before setting the input to
USB, audio files might not play back properly. If this occurs,
restart the audio playback software or the computer itself.

Publicité

Table des Matières
loading

Table des Matières