General Use - marcel aubert MA 212 Série Mode D'emploi

General use

 Each illuminator must be plugged in to the power outlet 18) and its power supply 12) has an
on/off switch 13).
 The power supply 12) with intensity regulator 14) is designed to allow precise and fast
illuminator intensity 14), as long as the power supply includes the intensity regulator feature.
 The illuminator intensity regulation is done by turning the knob 14).
MA 356-002
Specific use for this model.
 This power supply has a coarse and fine mode. To switch from one to the other, press the
intensity regulator knob 14).
 This power supply automatically saves the last intensity setting used (a brief <1 second
delay is necessary before the power supply shuts down).
 The coarse mode is the default mode when the system is powered on.
 Coarse mode (indicator light 16) = green), to quickly reach the desired illumination range.
 Fine mode (indicator light 16) = orange), about 10x more sensitive, for an optimal image
contrast adjustment.
ma 212&213$24.docx 18