Introduction; Before You Begin; Warranty Service - Jensen power 4002 Manuel D'installation Et D'utilisation

POWER Amplifiers

INTRODUCTION

The Jensen Power series of amplifiers were designed to meet or exceed the CEA-2010 test
standards. These new standards give all participating manufacturers (and many don't participate)
a baseline when comparing amplifiers of similar power output. The CEA Power rating protects
you, the customer. "Power is power – it doesn't matter who makes it," is not always true. What
does matter is whether the power can be produced in the first place. The RMS rating is the true
power you are getting. At Jensen, to be fair to you and to the competition, we rate our amps in
the two most popular ratings, including the CEA RMS rating. So feel confident that your Jensen
purchase decision was a sound one, and remember "If it's Too Loud, You're Too Old."

Before You Begin

We need to get the legal stuff out of the way, so please keep reading. Afterwards, you'll be
armed with the knowledge to install your new hard-hitting, speaker-pumping Jensen amplifier.
Exposure to loud sounds or music can permanently damage your hearing. Unfortunately, in
many cases, the damage is not noticeable until years later. In addition, loud music may hinder
your ability to hear traffic, police, and fire or emergency vehicles. Please be responsible and
have respect for other people by listening at moderate volumes!

Warranty Service

If your Jensen amplifier should ever require service, you will need the original dated receipt. If
you must return the unit for any reason, always include the receipt with the product.
2