System Indication - Alpine PKG-RSE2 Mode D'emploi

System Indication

DISC ERROR
Mechanism error.
•
1) Press and eject the disc.
If the disc does not eject, press and hold
seconds and eject the disc.
If the disc still does not eject, consult your Alpine dealer.
2) When the error indication remains after ejecting, press
again.
If the error indication still does not turn off after pressing
a few times, consult your Alpine dealer.
The temperature in the car is too low.
•
- Raise the temperature in the car to normal temperature.
NO DISC
• No disc is inserted.
- Insert a disc.
Although a disc is inserted, "NO DISC" is displayed and the
•
unit does not start to play or eject the disc.
- To remove the disc, press and hold
• Remote control operation is not possible.
- For some discs or playing modes, certain operations are not
possible. This is not a malfunction.
REGIONAL CODE
VIOLATION
Disc does not match regional code number.
•
- Load a disc that matches the regional code number.
HI-TEMP
• Protective circuit is activated at high temperature.
- The indicator will disappear when the temperature returns to
within operation range.
- Leave the power OFF until the temperature decreases and
then turn the power ON again.
Book_PKG-RSE2.indb Book_PKG-RSE2.indb 33 33
for at least 3
Mechanism error.
•
1) Press
2) When the error indication remains after ejecting, press
VIDEO SIGNAL SYSTEM IS
PAL disc is loaded.
•
- Load an NTSC disc.
for at least 3 seconds.
LOADING ERROR
EJECT ERROR
and eject the disc.
If the disc does not eject, press and hold
seconds and eject the disc.
If the disc still does not eject, consult your Alpine dealer.
again.
If the error indication still does not turn off after pressing
a few times, consult your Alpine dealer.
NOT CORRECT
for at least 3
33
-EN
4/8/06 4/8/06 2:17:49 AM 2:17:49 AM