Adjusting The Tint; Adjusting The Contrast; Adjusting The Sharpness; Resetting The Picture Adjustment - Alpine PKG-RSE2 Mode D'emploi

Adjusting the Tint

2
Press or and select TINT.
3
Press or to adjust the tint. Tint tone can be
adjusted from G15 (G MAX) to R15 (R MAX).
4
Wait 6 seconds until OSD disappears; the
adjustment will be saved automatically.

Adjusting the Contrast

2
Press or and select CONTRAST.
3
Press or to adjust the contrast. Contrast can
be adjusted from –15 (LOW) to +15 (HIGH).
4
Wait 6 seconds until OSD disappears; the
adjustment will be saved automatically.

Adjusting the Sharpness

2
Press or and select SHARPNESS.
3
Press or to adjust the screen quality. Screen
quality can be adjusted from -15 (SOFT) to +15
(HARD).
4
Wait 6 seconds until OSD disappears; the
adjustment will be saved automatically.
18
-EN
Book_PKG-RSE2.indb Book_PKG-RSE2.indb 18 18

Resetting the Picture Adjustment

2
Press or and select RESET.
3
Press or t o reset the picture adjustments.
• If you do not press or within 6 seconds, OSD disappears
and the previous adjustments will not be reset.
Setting Audio & Screen
Each source has different menu. Depending on the selection of source,
setting menu changes.
• Each source can be adjustable individually.
• Adjusting should be made within 6 seconds, otherwise OSD
(On Screen Display) will be automatically turned off.
1
Press and hold SELECT for at least 2 seconds to
show the SETUP menu on Front Control Keys. Or
Press SETUP button on Remote Control.
SELECT
2
Press SELECT/SETUP to switch to
AUDIO&SCREEN setting menu from PICTURE
setting menu. To change each item, press
Front Control Keys
SETUP
Remote Control
or
.
4/8/06 4/8/06 2:17:26 AM 2:17:26 AM