Burg Wächter BURGprotect MOTION 2010 Notice D'installation Et D'utilisation page 10

Pairing sensor with Base
1. Start App.
2. Expand menu "Dashboard"
"Add Accessory"
3. Scan the QR code, printed on this
accessory.
4. The APP will auto recognize this accessory
and add it to your list. Rename it with a
perspicuous name, which says you the
exact location of the sensor in case of
alarm, e.g. "Bathroom".
5. Test Alarm function e.g. by triggering
an SOS alarm.
10 | English
BURGprotect_MOTION 2010_03-2019_02.indd 10
–>
–>"Scan QR Code"
Coming Home / Leaving
Home alarm delay
Coming Home / Leaving Home
alarm delay:
If this function/these functions are activated
in the app, then an alarm will only be
triggered after a pre-defi ned time.
The length of time can be set individually
for each sensor in the app under "Device
Management" -> Advanced Settings >
"More" > "Coming Home delay"/
"Leaving Home delay".
The alarm can thus be armed/disarmed
in the house using the keypad, for example,
when entering/leaving the living area.
Home Scenario support
Sensors which are deactivated in "Home
Scenario" do not trigger an alarm when a
window is opened, for example. Sensors
which are still armed remain active.
MOTION 2010
10.04.2019 16:37:5