Overwrite Sd Card; Update Device Firmware; Device Information - SCS Sentinel WAPP Manuel D'utilisateur

Overwrite SD Card

This function will overwrite the oldest files when the capacity of memory card is full.
Turning on this function will enable the system to start overwriting the old files when the
available memory card capacity is not enough. This ensures the most up to date video
recordings can be saved so that you won't miss any important information.

Update device firmware

Update the camera firmware remotely to improve the performance and reliability. It
is strongly recommended to plug in the Ethernet cable when you update the device
firmware. The camera will reboot after updating the firmware successfully.

Device Information

This section contains the device version, total size and available size of the memory
.
card
26