SCS Sentinel WAPP Manuel D'utilisateur page 57

Admin Password
The Admin Password is a specific security code for your advanced settings.
The default password is 123456. Please use this function to change the default password
into your personal admin password. For the protection of your system configuration,
every time you change the advanced settings, you need to enter the admin password.
Note: If you forgot your admin password, please press the reset button on the camera DC
jack to restore the password into default administrator value 123456 (please refer to the
Camera Overview section).
Email Alert
WAPP camera is capable of sending email alerts to notify you when
any movement occurred within the detection range. Enable the
Email alert function will send an alert info to the Email account that
you set up in the Email setting section.
Event Notify
WAPP camera is capable of notifying you through smart phone
"Push
Notification" function whenever any recording event is
produced.
If you want to receiver push notification:
1. Enable the event notify function in the OMGuard APP.
2. Make sure you have activated the "Push Notification" function for
your smart phone.
Time Zone
The drop-down list shows the world time zone. Select the time zone that will work the
.
best for you. Please refer to the APPENDIX: WORLD TIME ZONE for your setting
Note : Veuillez régler manuellement l'heure du système lors du passage à l'heure d'été.
23