SCS Sentinel WAPP Manuel D'utilisateur page 46

(iOS)
Note: When you type in the default password, the system will notify you to
change
it. Please follow the instruction of the Device Password section to change the
default password into your personal security code.
4. Click SAVE to complete the camera settings.
5. You can refer to the ADD CAMERA section to add more cameras.
In most cases, you can successfully add the camera according to the steps above.
However, the Wi-Fi-enabled devices, such as this WAPP camera, may not find the
network if Wi-Fi router turns off the SSID broadcasting function. Please enable the SSID
broadcasting to complete the settings. Due to security concerns, it is suggested to use
the WPA/WPA2/ WPA2-PSK protocol for Wi-Fi network.
Note: Most Wi-Fi routers broadcast the Service Set Identifier (SSID) by default. This
is the name of your wireless network, and SSID broadcasting is how Wi-Fi-enabled
devices find networks.
12
(Android)