Technical Specifications - Perel CDC2 Notice D'emploi

1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the CDC2! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, don't install or use it and
contact your dealer.
2. Safety Instructions
Keep this device away from rain and moisture.
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not accept responsibility for any ensuing defects
or problems.
• Note that damage caused by user modifications to the device is not covered by the warranty.
• Keep the device away from children and unauthorised users.
3. Power Supply
• Open the battery compartment at the back and insert 2 x AA batteries respecting the polarity. Close the battery compartment.
• Use of alkaline batteries is recommended.
• Never use old and fresh batteries at the same time.
• Take out the batteries if the device is not used for a long time.
4. Setting
• Time Setting
o In normal time setting, press SET for 2 seconds to enter the time setting mode.
o Press SET to choose day / language → 12/24h → seconds → hour → minutes → year → month → date → normal time display in this order.
o Modify a blinking item with UP/°C/°F. Hold the button pressed to modify rapidly. Press SET to confirm.
o Day / language: Press UP/°C/°F to select one of the supported languages (E for English, D for German, F for French, I for Italian and S for Spanish).
o If no button is pressed for 60 seconds, the calendar will automatically return to the normal display mode.
o The day will automatically be modified when modifying the date.
• Alarm Setting
o In normal time setting, press MODE to enter the alarm mode. Hold SET pressed for 2 seconds to enter the alarm setting mode.
o Press SET to choose hour → minutes → alarm mode in this order.
o Modify a blinking item with UP/°C/°F. Hold the button pressed to modify rapidly. Press SET to confirm.
o In alarm mode, press UP/°C/°F to switch the alarm on or off (
• Snoozing an Alarm
o The alarm will sound for 1 minute at the programmed time.
o Press any button to stop the alarm. Press SNOOZE to use the snooze function. The snooze icon will appear.
5. Other Functions
• Temperature Unit
o In normal time setting, press UP/°C/°F to switch between degrees Celsius and degrees Fahrenheit.
• Manual RCC Reception
o In normal time setting, hold MANUAL for 2 seconds to activate the manual RCC reception.
o The RCC signal will automatically adjust time and date. Remember: your CDC2 will need up to 10 minutes to receive the signal according to the signal strength.
• Resetting Your WC8205
o Press RESET using a pointy object to reset all settings.

6. Technical Specifications

Power Supply
Temperature Range
Dimensions
Total Weight
For more info concerning this product, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior notice.
CDC2
CDC2 – DCF77-CONTROLLED CALENDAR
will appear or disappear).
will blink.
2 x 1.5V AA batteries (order code LR6C, not incl.)
-9.9°C ~ +59.9°C
257 x 226 x 21mm
610g
will blink.
2 PEREL