Using Your Cleaner; Cleaner Maintenance - Hoover Space Explorer Bagless Manuel D'utilisation

GETTING TO KNOW YOUR CLEANER
A. Cleaner Main Body
B. On/Off Pedal
C. Hose Latch for Nano Pack™ system
D. Cord Reel Pedal
E. Bin Release Button
F. Hose Release Button
G. Hose
H. Hose Handle Hook (For Nano Pack™
system)
I. Hose Handle
J. Suction Regulator
K. Telescopic Tube
L. Telescopic Tube Adjuster
M. Telescopic Tube Parking Hook (For
Nano Pack™ system)
N. Carpet and Floor nozzle (GP)**
ASSEMBLING YOUR CLEANER
Remove all components from the packaging.
1. Connect the hose into the cleaner main body ensuing it locks into position.
To release: simply press the buttons on the hose end and pull. [1]
Connect the hose handle to the telescopic tube upper end [2], or accessories if
2.
required.
Connect the telescopic tube lower end to the carpet and floor nozzle** [3] or
3.
accessories, if required.

USING YOUR CLEANER

Extract power cord and plug it into the power supply. [4] Do not pull the cord beyond
1.
the red marker.
2. Adjust the telescopic tube to the desired height by moving the telescopic tube
adjuster to the most comfortable cleaning position. [5]
3. Carpet & Floor Nozzle **. Press the floor type selector* on the nozzle [6] to select
the ideal cleaning mode for the floor type.
Hard Floor – Brushes are lowered to protect the floor.
Carpet – Brushes are raised for the deepest clean.
N1. Carpet Nozzle (CA)**
N2. Hard Floor Nozzle (HF)**
O. Floor Type Selector*
P. 2 in 1 accessory
Q. Exhaust Filter Cover Release Button
R. Nozzle Parking Slot
S. Telescopic Tube Parking Slot
T. Exhaust Filter
U. Dust Bin
V. Pet Hair Remover Mini Turbo Nozzle*
W. Allergen Remover Mini Turbo Nozzle*
X. Grand Turbo Nozzle*
Y. Parquet Nozzle*
Y1. Parquet Extra Nozzle*
Y2. Parquet Nozzle*
4. Switch the cleaner on by pressing the On/Off Pedal on the cleaner main body. [7]
5. Adjust the Suction Regulator on the hose handle to the desired level. [8]
6. Switch off at the end of use by pressing the On/Off Pedal. Unplug and press the cord reel
pedal to wind the power cord back into the cleaner. [9]
PARKING AND STORAGE SECTION
The flexible hose and telescopic tube can be parked for temporary while in use [10] or in
the Nano Pack™ storage position when not in use:
Retract the telescopic tube to its storage length. [13]
1.
2. Remove the nozzle from the end of the telescopic tube.
3. Remove the hose handle from the telescopic tube.
4. Lift the Hose Latch at the rear of the cleaner and wrap the flexible hose around the
product. [13]
Place the nozzle into the nozzle parking slot underneath the product. [13]
5.
6. Place the telescopic tube into the telescopic tube parking slot underneath the
product. [13]

CLEANER MAINTENANCE

Emptying the Dust Container
When the dust reaches the max level indicator on the container, empty the dust container.
IMPORTANT: To maintain optimum performance do not allow the dust to sit higher than
the Max level.
Remove the hose from the cleaner. [1]
1.
Press the dust container release buttons and lift the dust container out of cleaner. [14]
2.
3. Hold the dust container with one hand and press dust container flap release button
to empty the dust. [15]
4. Press the pre-motor filter frame release button and remove the pre-motor filter from
the frame. [16] If the filter is dirty refer to section 'Cleaning the Washable Filters'.
5. Use the dusting brush, when necessary to remove excessive dust from the internal
surface of the dust container.
6. Close the dust container flap, ensuring the latch is well closed. Then refit the dust
container into the cleaner.
Cleaning the Washable Filters
The cleaner is fitted with a pre-motor filter. To maintain optimum cleaning performance,
regularly clean the filters. Remove excess dust from the filters by gently tapping them against
the side to release dust. The filters should be washed after every 5 container empties.
IMPORTANT: All bagless cleaners require regular filter cleaning. Failure to clean your filters
may result in air blockage, overheating and product failure. This may invalidate your guarantee.
IMPORTANT: Regularly check and maintain the filters by following the filter
maintenance instructions, it is also recommended that you purchase new filters
after every 3rd filter wash. This will maintain your cleaner's performance.
2
*Certain Models Only **Nozzle design may vary according to models
GB