Adjusting The Headlight Beams - Benelli BN125 Manuel Du Propriétaire

Instrument and control functions
To install the passenger seat
1. Insert the projection on the rear of the
rider seat into the seat holder as shown,
and then push the rear of the seat down
to lock it in place.
EN
3
Rider seat
To remove the rider seat
1. To remove the passenger seat.
2 1
2. Unscrew the 2 screws.
3. Remove the rider seat.
To install the rider seat
1. Proceed in reverse order.
3 - 12
Adjusting the headlight beam
The headlight beam adjusting knob is
used to raise or lower the height of the
headlight beam. It may be necessary to
adjust the headlight beam to increase
3
1
visibility and help prevent blinding onco-
ming drivers when carrying more or less
2 1
load than usual.
Obey local laws and regulations when
adjusting the headlights.
To raise the headlight beams, turn the
knob in direction (A).
To lower the headlight beams, turn the
knob in direction (B).
B
A