Recorded List - Eurochron A620 Mode D'emploi

chosen, the graphical display will show a green line with the average
value. The set upper threshold is displayed with a red line, the lower
threshold with a blue line.
The upper right also shows a battery icon that will display the
charge condition of the batteries inserted in the thermo logger to
you. There also is a gear at the right at the very top. If you tap this
when the measurement has stopped, the display will switch back
to the already-familiar setting screen.
f) Recorded list
"Recorded list" shows all measured values recorded in the app.
Tap the function. A list of all recordings opens. These recordings
are displayed in chronological order and can be edited subse-
quently.
If you tap "Photo", you will be shown a small submenu. Select one
of the options shown. Tap "Recording" to open the keyboard. You
can then rename this measured value recording. Tap "Edit". You
can now delete this measured value recording irrevocably.
If you want to view the recordings, tap the arrow on the right. A
new display with the recorded measured values opens. At the very
top, you can see the starting time and the starting date of the re-
cording. Below it, there is a text field in which you can file notes.
The individual measured values are evident below. At the lower
edge, you can choose between "CSV" (table view) and "Evalua-
tion" (graphical view).
The graphical view permits scrolling and elongating or compressing
the measured result as desired, just as is common on mobile end
devices. If you select "Divide" at the upper right, a small submenu
will be opened. You can send the results of the measurements, e.g.
by email, here. Use the display and the possibility of your mobile
end device for orientation.
50