Using Your Cd Player - Insignia NS-DA1902 Guide De L'utilisateur

NS-DA1902 5-Disc CD Player
Item Control
12 RANDOM
button
13 REPEAT
button
14 DISC SKIP
button

Using your CD player

Turning the CD player on and off
To turn the CD player on and off:
1 Press the
player to turn the CD player on.
If the CD player is in standby mode, press the
STANDBY/ON button on the remote to
turn the player on.
2 Press the
CD player again to turn the CD player off.
If the CD player is on, press the
STANDBY/ON button on the remote to put
the player in standby mode.
Using the remote control
To use the remote control:
1 Make sure that there is a fresh battery in the
remote control.
2 Point the remote control at the remote sensor
window on the CD player.
3 Press the button on the remote control.
Notes • Bright lights can interfere with the
remote control's operation.
• Recommended maximum distance
from the remote control to the CD
player: 16 feet (5 meters).
Playing a CD
To play a disc:
1 Turn the CD player on.
2 Press the (open/close) button. The disc
tray opens.
3 Press the DISC 1 - 5 button on the remote
control. The disc tray rotates one cycle and
stops.
4 Place the first disc on the disc holder with the
label side up.
5 To load additional discs, press the DISC 1 - 5
button on the remote control, or the DISC
SKIP button on the player to rotate the disc
tray.
6 When the discs are loaded, press the
(open/close) button to close the disc tray.
7 Press the PLAY/PAUSE button to start
playback. Some discs automatically start
playing when they are loaded.
Function
Press to start or stop random
playback.
Press to repeat a single track, a
disc, or all discs.
Press to skip to the next disc
when searching for a specific
track.
(Standby/on) button on the CD
(Standby/on) button on the
www.insignia-products.com
Notes
• Use the
front panel to open or close the disc
tray. Do not push the disc tray or you
may damage the CD player.
• Let the disc tray open completely
before removing the discs. Press the
(open/close) button to close the
disc tray after you remove the discs.
• When the CHANGE DISC button of
the front panel or
button of the remote control is pressed
during playback, the DISC SKIP
function cannot be accessed.
• During playback, you can open and
close the disc tray to add or change
discs without stopping playback by
pressing the CHANGE DISC button on
the front panel or the
button on the remote control. If you
use the (open/close) button on the
front panel to open the disc tray, the
CD player will stop playing. The disc
holder will rotate half circle so that the
disc can be taken out. If you use the
OPEN / CLOSE button on the
remote control to open the disc tray,
the playback will not be affected.
• Playback will begin from first track/file
on the disc you have selected to play.
• After the disc finishes playing, the next
disc will automatically play.
• When there is no CD in one of the
5-disc positions, that position will be
skipped and the next CD will be
played.
• When the
pressed, playback will begin
automatically from the next disc. (It is
not necessary to press the
PAUSE button)
8 Press STOP to stop playback.
Pausing playback
To pause playback:
• Press the PLAY/PAUSE button during
playback to stop at the location where you
want to interrupt playback. To resume normal
playback, press the
again.
Stopping playback
To stop playback:
• Press the STOP button to stop playback.
Playback options
Searching for the beginning of a track or file
To search for the beginning of a track or file:
1 Press the
you find the next track or file you want.
2 Press the
you find the previous track or file you want.
Locating a specific point on a track or file
To locate a particular point on a track or file:
1 During playback, press and hold the
SKIP button for 2 seconds to start moving
forward at high speed.
- OR -
(open/close) button on the
(open/close)
(open/close)
DISC SKIP button is
PLAY/
PLAY/PAUSE button
SKIP button repeatedly until
SKIP button repeatedly until
5