Inserting Batteries - Sony FA-EBA1 Mode D'emploi

Preparations

Inserting batteries

This unit can accommodate either
set of the following:
• Four AA-size alkaline batteries
(4 or 8)
• Four AA-size rechargeable
nickel-metal hydride (Ni-MH)
batteries (4 or 8)
No batteries are supplied with the unit.
1
Press and hold the battery
magazine unlock buttons in
the direction of the arrows
(  ), and then pull out the
battery magazine.
2
Insert the batteries into
the battery chamber as
illustrated (
the positive battery terminal
GB
4
) by putting
first. ( indicates the
direction of the batteries.)
• When inserting each of the
batteries, be sure to put its
positive terminal first into the
battery chamber.
• When removing each of the
batteries, push it up from the
back of the battery chamber.
• Insert 4 batteries into the
battery chamber on the top
side of the battery magazine
and 4 batteries into the one
on the bottom side.
This unit is capable of
operating with 4 batteries
inserted in the battery
chamber either on the top
side or on the bottom side of
the battery magazine.
3
Put the battery magazine
back into this unit and push
in the magazine until it clicks
into place.