Lathem 1600E Manuel De L'utilisateur page 27

TIME
ZONE
SELECT
Reception
Indication
Signal Condition Indication
ON Good
FLASHING or OFF
26
CHANGE SET
Not good enough
2
É tape
In case of the example, press the
CHANGE button to set at "2", and then
press the SET button.
S 3
tep
After you finish setting the time zone,
press the SET button once again. Now
the time zone setting has been completed.
Replace the cover and lock.
IMPORTANT: If you do not complete
Step 3, the clock will not print and start
reception of radio signal.