Guardian MDS89740RWA Mode D'emploi Et Garantie page 4

Adjusting the Bench to the Proper Height:
1. While standing in front of the assembled bench, as if preparing to sit, the back of the users knees should touch front side of the seat
bench. This should allow the users feet to be firmly on the floor while properly seated.
2. Adjust the leg extensions as needed.
3. Ensure all four tips rest evenly on the floor.
Maintenance
• Prior to use:
• Inspect the bath bench for damaged or loose components, and ensure that all parts are secure.
• Check that all four legs are adjusted evenly.
• Check the tips on the leg extension for rips, cracks or wear.
• Check the bench and back seat for cracks or ruptures in the plastic.
• Clean with regular household cleaning products, use a non-abrasive cleaner with warm water. DO NOT use abrasive powders or
scouring pads.
NOTE: If any part or mechanism appears to be unsafe or damaged, DO NOT USE THE PRODUCT. If you experience problems, please
contact Medline at 1-800-633-5463.
4
Figure 5
MDS89745RA (PIC-00303)
Rev: 03/15/2021