Replacing The Printer Paper; Updating The Software Via Usb - Waeco AirConServiceCenter ASC2500G Notice D'utilisation

ASC2500G/ASC3500G LE
9.8

Replacing the printer paper

1. To replace the printer paper roll (15), open the cover (K).
2. Insert the new paper roll and close the cover (K).
9.9

Updating the software via USB

The software is updated using a USB stick.
I
NOTE
The USB stick must be formatted with the FAT32 file system.
When updating the software, the following data is stored in the internal
memory of the station:
 the current software of the AirConServiceCenter
 the current database with all the common vehicle types and corre-
sponding filling quantities
You can update the software and the database separately.
1. Copy the current software on the USB stick.
2. Insert the USB stick in the USB port (16) and switch on the device.
EN
K
16
Service tasks
103