Back to Basics Smoothie Junior A Manuel D'utilisation page 6

To use your smoothie maker, begin by assembling the mixing jar.
Stir Stick
Lid Cap
Lid
Mixing Jar
Blender Cap
Rubber Gasket
Blade Base
Dispensing Valve
Motor Base
1. Position the rubber gasket down onto the circular flat surface in the blade
base.
2. Place the bottom threaded section of the mixing jar down into the blade base.
Engage threads by twisting the blade base clockwise until tightened onto the
mixing jar. Make sure that the blade base is tightly fastened to the mixing jar
and that the rubber gasket is properly compressed between the mixing jar and
the blade base.
3. Push the lid onto the top of the mixing jar. Place the clear lid cap in the center
of the lid or place the stir stick through the center of the lid if blending liquids
or frozen drinks.
4. Place the mixing jar onto the motor base so that the bottom of the blade base
is sitting flat on the motor base.
5. Plug in the cord. Your smoothie maker is now ready to use!
OPERATION
Use and Care (Assembly)
6