Inserting / Changing Batteries - DS Produkte 05783 Mode D'emploi

EN
Overview of Remote Control
1 AN / AUS (on / off) switch
2 Musik-Sensor (music sen-
sor)
3 H e l l i g ke i t s e i n s t e l l u n g
(brightness setting)

Inserting / Changing Batteries

The battery in the remote control is already inserted. All
you have to do is remove the transport securing device.
1. Push the catch on the battery compartment to the right
using your fi nger nail and pull out the battery compartment.
2. Remove the used battery and dispose of it in an
environmentally friendly way.
3. Insert a 3 V battery of the CR2025 type. Ensure the correct
polarity (+/-) when inserting the battery.
4. Place the battery compartment back into the remote
control. It must engage audibly.
6
14
1 2
4 Geschwindigkeitseinstel-
lung (speed setting)
5 Control pad for colour se-
lection
6 Farbwechsel
change) mode
3
4
5
(colour